Sujet: Help !!! Boot sans fin... (probleme nouveau ?)

[nash35]

Bonjour tout le monde...

J'ai un VU+Duo qui marche depuis longtemps avec la POD HD.
J'ai installé la Blackhole 1.7.6, très bien...
Aujourd'hui j'ai rebooté... et puis plus rien impossible d'arriver à la fin du boot.

Ce n'est PAS le probleme de bootloader.

Le système se charge en entier (j'accede telnet/ftp etc...) mais la GUI ne se charge pas.
En sortie j'ai une image hdmi de boot (POD maintenant) avec le sablier qui tourne indéfiniment.

HELP !!!!
des idées ?
J'ai essayé plusieurs images, POD, Blackhole, etc... mais memes symptomes... impossibilité d'arriver à la fin.
Il y a un disque dur à l'intérieur.

[MiKe]

Tu peux débrancher le HDD pour commencer et voir s'il démarre correctement.

Sinon, il te faut reflasher la POD 

[nash35]

Merci pour la réponse.

- Reflasher : c'est fait (plusieurs fois, plusieurs sticks, différentes images)
- Le disque : à priori il fonctionne puisque je le vois en ftp et je peux faire tout ce que je veux dessus

Est-ce qu'il se pourrait qu'il soit endommagé (fat ou equivalent), et que le boot ne se termine pas à cause de ça ?

A+

[samarc]

N'as tu pas oublié une clef usb à l'arrière de vu+ ?

A+

Marc

[nash35]

Non tout est débranché  maintenant sauf hdmi.
Ce soir je démonte et j enlevé le hdd , je ne vois qu'un pb logiciel du hdd.
Où alors c est un pb hardware.... Si c est ça je suis mort... (habite au Caire...difficile de trouver un autre vu)

[nash35]

Mais le plus pénible c est que grosso modo :
- étage hdmi ok
- hdd ok
- réseau ok
- Telnet/ftp ok
Ça semble être lié au reste... Quest-ce qu'il reste ? La partie image satellite et tuners...

[Doume]

Si tu as accès en telnet, essaie de lancer Enigma2 en manuel dans la session telnet, pour voir pourquoi il ne démarre pas....

[nash35]

Merci pour l'idée... Bonne...

Comment on fait ?
(la ligne de commande)

Et par ailleurs, est-ce qu'il y à quelque part un log du boot ?

[soussi]

Salam

regarde aussi, coté lien symlink, j'avais eu un souci similaire, le lien dirigeait vers la clé /usb/picon et comme le dossier picon n'était plus sur la clé usb, ma dream rebootait sans arrêt

@+

[nash35]

Oui merci.
Je vais tout essayer ce soir.
J ai trouvé la doc et commandes Telnet.

[nash35]

Le log de startup...

J'essaye de comprendre... mais si vous pouviez me dire si vous voyez quelque chose de vraiment anormal, ça aiderait.
(Le logitech c'est un clavier sans fil)(mais meme comportement avec ou sans).


setenv('prefix', '/usr', 0)
setenv('exec_prefix', '/usr', 0)
setenv('bindir', '/usr/bin', 0)
setenv('sbindir', '/usr/sbin', 0)
setenv('libexecdir', '/usr/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '/com', 0)
setenv('localstatedir', '/var', 0)
setenv('libdir', '/usr/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/com', 1)
setenv('localstatedir', '/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
+ (1) Background File Eraser
+ ( graphics acceleration manager
+ (9) GFBDC
12150k video mem
 - double buffering available!
5670kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 5760)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x6a8ec8 8448 bytes, stride 132
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
PYTHONPATH: /usr/lib/enigma2/python
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) Hdmi CEC driver
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
+ (21) input device driver
Input device "Logitech USB Receiver" is not a keyboard.
Input device "Logitech USB Receiver" is not a keyboard.
Input device "dreambox remote control (native)" is not a keyboard.
Found 3 input devices!
+ (21) Console RC Driver
failed to open /dev/tty0
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
loaded 3616 services
scanning for frontends..
opening frontend 0
detected satellite frontend
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
close frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
opening frontend 1
detected satellite frontend
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
close frontend 1
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 2
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!

setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
enumerating block devices...
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
found block device 'mtdblock5': blacklisted
found block device 'mtdblock6': blacklisted
found block device 'sda': ok, removable=False, cdrom=False, partitions=['sda1']
new Harddisk sda ->main thread is non-idle! display spinner!
 /dev/sda -> /dev/sda
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
found block device 'sda1': error querying properties
not loading user skin:  [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml'
menu_mainmenu
Preferred tag editor set to  None
Reading satellites.xml
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/share/enigma2/unicable.xml
removing internal link on frontend id 1
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7335 DVB-S2 NIM (internal), need rotorworkaround No, enabled No, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7335 DVB-S2 NIM (internal), need rotorworkaround No, enabled No, DVB-S2 Yes
slot: 0 configmode: nothing
slot: 1 configmode: nothing
sec config completed
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/share/enigma2/setup.xml
main thread is non-idle! display spinner!
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
53 entries in Bouquet userbouquet.favourites.tv
1 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
Installing image defaults
Reading .info file /usr/share/enigma2/defaults/Dream/dm8000.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
Reading .info file /usr/share/enigma2/defaults/Dream/dm800.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
Reading .info file /usr/share/enigma2/defaults/Dream/dm7025.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
Reading .info file /usr/share/enigma2/defaults/Dream/dm500hd.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
Reading .info file /usr/share/enigma2/defaults/Dream/dm7020hd.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
Reading .info file /usr/share/enigma2/defaults/Dream/dm800se.info
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-S']}
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
prerequisites: {u'hardware': ['dm8000']}
prerequisites: {u'hardware': ['dm800']}
prerequisites: {u'hardware': ['dm7025']}
prerequisites: {u'hardware': ['dm500hd']}
prerequisites: {u'hardware': ['dm7020hd']}
prerequisites: {u'hardware': ['dm800se']}
self.packageslist: [({'prerequisites': {u'hardware': ['dm500hd']}, 'attributes': {u'config': [{'directory': '/usr/share/enigma2/defaults/Dream/', 'name': 'settings.500hd'}], u'favourites': [{'directory': '/usr/share/enigma2/defaults/Dream/', 'name': 'bouquets.tv'}, {'directory': '/usr/share/enigma2/defaults/Dream/hdbouquets/', 'name': 'userbouquet.favourites.tv'}], 'filestype': 'directories', 'name': 'Dream Multimedia Default', 'author': 'Dream Multimedia GmbH'}}, '/usr/share/enigma2/defaults/Dream/dm500hd.info')]
installing package with index 0 and name Dream Multimedia Default
currentAttributeIndex: 0
installing skin with index 0
currentAttributeIndex: 1
installing config with index 0
merging config: /usr/share/enigma2/defaults/Dream/  -  settings.500hd
currentAttributeIndex: 1
installing config with index 1
currentAttributeIndex: 2
installing favourites with index 0
installing favourites: /usr/share/enigma2/defaults/Dream/  -  bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
53 entries in Bouquet userbouquet.favourites.tv
1 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
currentAttributeIndex: 2
installing favourites with index 1
installing favourites: /usr/share/enigma2/defaults/Dream/hdbouquets/  -  userbouquet.favourites.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
53 entries in Bouquet userbouquet.favourites.tv
1 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
currentAttributeIndex: 2
installing favourites with index 2
currentAttributeIndex: 3
installing package with index 0
currentAttributeIndex: 4
installing services with index 0
end of package reached
set status to DONE
installing done!
[FONT] adding font /usr/share/fonts/nmsbd.ttf...executing main
OK (Display)
 - double buffering available!
4050kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5760)
[FONT] adding font /usr/share/fonts/MyriadPro-Regular.otf...OK (Regular)
[FONT] adding font /usr/share/fonts/MyriadPro-Semibold.otf...OK (Semibold)
[FONT] adding font /usr/share/fonts/MyriadPro-SemiboldIt.otf...OK (Semiboldit)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
Unknown device type: Logitech USB Receiver
Unknown device type: Logitech USB Receiver
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >

[nash35]

Bon :
- J'ai essayé sans le dongle keyboard par acquis de conscience : ne genre rien
- J'ai reflashé encore une fois : rien
- J'ai enlevé le disque dur : rien
- J'ai reflashé sans disque dur : rien

... Problème hardware

[Doume]

C'est simplement un problème de skin, à priori : Le skin pointé dans le fichier de settings est introuvable

Je ne comprends pas qu'en reflachant, ça ne marche pas !
Ou alors, c'est que tu flashes une image qui n'est pas pour ton récepteur !

[nash35]

Merci pour l'aide...

J'ai essayé avec POD et BH 176; maintenant je charge une image constructeur pour voir.
Mais grosso-modo toujours la meme chose : impossible d'arriver à la fin du démarrage
J'ai toujours telnet et FTP, et le log montre que ça s'arrete toujours aux deux erreurs io.

J'essaye avec plusieurs clefs USB aussi.

Moi non plus comprends pas...

[Doume]

Je te suggère de tout débrancher le superflu ( clavier, WiFi, disque dur interne/externe , clés USB additionnelles)
et reflasher en configuration 'light'