Sujet: VU+ Control Centre - VUCC

[E-D-S]

VU+ Control Centre



Le bouton ftp est couplé a FileZilla, le webcontrol au navigateur web etc ...
Très complet dès sa première version, ce soft risque de vite devenir un indispensable.

VU+ Control Centre Version 0.1 Beta by Lee Hudson

Known Bug:
Media Files Manager

Transferring MKV files over 2GB causes the Progress Bar to become inaccurate.
Don't worry if the progress bar gets to 100% goes blank and the "Please wait file message"
still appears.
Just leave the app running as it's still transferring the file. Once the file has completed
transferring you'll see the filename appear in the Remote or Local file list window respectively.
It can take a while to complete if your uploading or downloading a very large MKV file.
-------------------------------------------------------------------------------------------------------------------------------------------------------
A quick VuCC Video guide is available on Youtube
http://www.youtube.com/watch?v=2wvopTTwmhY
-------------------------------------------------------------------------------------------------------------------------------------------------------

Installation Instructions
------------------------------------
Unzip all the files and folders in the zip file to your local hard drive.


How to Use VUCC
-----------------------------
1. Run the VUCC.exe application.
2. Enter the IP address of your Vu+ in the IP Address field, example 192.168.1.5
3. If you have changed the password on your receiver, enter the password in the password field
otherwise leave blank.
4. Click Connect Button


Telnet
---------
Self explanatory.
For a list of Busybox commands check out the following website:
http://www.busybox.net/downloads/BusyBox.html


FTP
----
Click the FTP Button.
This will load FileZilla FTP Client and automatically connect to your Vu+
For instructions on using FileZilla check out the following website:
http://wiki.filezilla-project.org/Using


Settings Backup
-------------------------
Click on Settings Backup Button.
Click the Backup Settings Button.
This will backup all the settings from the Vu+ to the /enigma2 and /tuxbox folders on your PC HDD.
The /enigma2 and /tuxbox folders will be located in the same folder as this program.

Click the Restore Vu+ Settings Button.
All your backup data will be restored to the /etc/enigma2 and /etc/tuxbox folders on the Vu+
Once the files have successfully been restored you'll need to reboot the receiver by powering off
and on using the switch on the back of the receiver.


Media Files Manager
---------------------------------
Uploading a Media File.
Select the Hard Drive and folder that contains your Media File.
Select the PVR device you have installed from the "Choose PVR Device" drop down window.
Click on the Local file you want to upload so it's highlighted in blue.
Click the Upload Button to transfer the file from your local HDD to the Vu+.

Downloading a Media File.
Select the Hard Drive and folder that you wish the file to be transferred too.
Select the PVR device you have installed from the "Choose PVR Device" drop down window.
Click on the Remote file you want to download so it's highlighted in blue.
Click the Download Button to transfer the file from the Vu+ to your local HDD.

Deleting Local File
Select Local file so it's highlighted in blue.
Click Delete Local File Button.

Deleting Remote File
Select remote file so it's highlighted in blue.
Click Delete Remote File Button.


Vu+ HDD Manager
------------------------------
To mount and format a Hard Disk Drive do the following:
Select the receiver type and Hard Disk type.
Click the Format Button.

This will erase all the data on the Vu+ HDD.

Wait until the format has completed. It can take approx 10-15 minutes for a 1TB HDD.
You'll see a command prompt like the one below when the format has completed.

root@bm750>


Vu+ WebControl
---------------------------
Click the Vu+ WebControl Button to open Vu+ WebControl in your default web browser.


Kind Regards

Lee.

Released 16-9-2010

VuCC_V0.1

 

[MiKe]

Cool, je test de suite !

Merci pour la news  

NB : J'ai mis le fichier sur notre serveur plutôt que chez MegaUpLoad.

[MiKe]

Bon feedback rapidos :

- Le mot de passe ne sert à rien en telnet, il faut le taper à nouveau pour se connecter
- il n'y a pas de bouton pour se déconnecter de l'application
- pas moyen de sauvegarder des profils types
- pas moyen de mettre des ports alternatifs pour le webif, par exemple 8020

Pas mal pour un premier jet 

[Drogba84]

Je ne l'ai pas encore testé, mais à première vue VUCC c'est DCC avec un skin VU+

[MiKe]

Pas tout à fait, mais l'esprit est forcément le même 

[eBox]

Je ne l'ai pas encore testé, mais à première vue VUCC c'est DCC avec un skin VU+

Non ce n'est pas un DCC déguisé

[MiKe]

Vu+ Control Centre V0.2 :

Available to Download Now!
Includes:
Telnet Client
FTP Client
Media File Manager
HDD Manager
Settings Backup
Upload Channel List
Web Interface.

VuCC_V0.2.zip

[E-D-S]

Tuto Vidéo sur Youtube

Vu+ Control Centre Version 0.2 for Vu+ Duo HD and Vu+ Solo HD

PS: si un admin passe par là, on ne peut pas intégrer le code d'une vidéo youtube directement dans un post ?
Ce serait plus pratique pour pouvoir lire directement la vidéo sans quitter le forum  

[E-D-S]

VU+ Control Centre Version 0.3 Beta by Lee Hudson

Installation Instructions
-------------------------
Unzip all the files and folders in the zip file to your local hard drive.


How to Use VUCC
--------------------
1. Run the VUCC.exe application.
2. Enter the IP address of your Vu+ in the IP Address field, example 192.168.1.5
If your using a private local IP address enter the IP like this: 010.000.000.001
3. If you have changed the password on your receiver, enter the password in the password field
otherwise leave blank.
4. Click Connect Button


Version 0.3 Released 11-7-2011

Added IPK Installer.
Fixed Telnet paste issue. You can now use CTRL V or Right Mouse Button to paste code from clipboard to Telnet Window

VuCC_V0.3.zip

 

[samarc]

Bonjour.
Les liens megaupload sont morts , la version 0.3 est-elle perdue ?

merci

[La brocante]

Pour info, nous en sommes en version 0.5 

- http://www.sat-universe.com/attachment.php?attachmentid=295859&d=1325414680

[vecteur61]

Pour info, nous en sommes en version 0.5 

- http://www.sat-universe.com/attachment.php?attachmentid=295859&d=1325414680

merci la brocante pour cette version 0.5 

[tot31]

Pour info, nous en sommes en version 0.5 

- http://www.sat-universe.com/attachment.php?attachmentid=295859&d=1325414680

Merci pour le lien

[dm80084hd]

Salut

merci pour ce logiciel

ca remplace bien mon dcc

@+

[cayenne]

bonjour Vu+ Control Centre V0.6
http://www.goldwafers.com/cart/Vu-Duo-Twin-Tuner-DVB-S2-HD-Linux-Engima2-Satellite-Receiver-PVR-Ready.html