Auteur Sujet: Image PGI v0.7.2a Varazahav (based on DGS 12413)  (Lu 3939 fois)

0 Membres et 1 Invité sur ce sujet

Hors ligne zorglub

  • Beta testeurs
  • Membre Héroïque
  • ****
  • Messages: 580
Image PGI v0.7.2a Varazahav (based on DGS 12413)
« le: 25 juillet 2010 à 20:15:35 »
Voici une nouvelle version corrigée de la PGI 7 donc toujours basée sur la DGS r12413, en attendant la PGI 8 qui devrait être basée sur la r12947 (ou +)...

Many thanks to uncle.f for helping to prepare this release!

ATTENTION: There was lots of changes in this image to take care about correct handling of HDD on reboot and power down (including reboots due to application crashes and web interface commands). This should minimise disk errors in the future, however, it won't resolve any existing inconsistencies you may already have on your disk. Therefore, we highly recommend to check your HDD for errors at least once after installing this image (using OSD menu option). We hope that from now on disk errors will be very rare.

ATTENTION: There is new script for db.dat consistency checking which will be launched automatically for every db.dat that was never checked before. This script runs at startup and depending on how many satellites you have configured it may take between several seconds and several minutes to complete. A message "DB CHECK" will be shown on VFD display while the script is running. PLEASE BE PATIENT AND LET IT FINISH. It only runs ONCE per db.dat. It will be run again if you replace your db.dat with another one which had never been checked before. If you want to repeat the check, use Telnet command: "dbchk" followed by reboot.



Full Change List for PGI 0.7.2
===============================================================================

- Fix: problems with virtual keyboard behaviour and direct channel number input should be gone now
- Fix: cron daemon starts correctly now
- Fix: improvements to database check script
- Fix: improvements to network and HDD initialisation scripts
- Change: changed naming of scripts in /var/bin/init.d (see the directory for some examples)
- New: absolutely all printable ASCII characters can now be displayed on VFD (except the 1st generation segment VFD models)
- New: it is now possible to flash images from USB stick and /media partition of the receiver directly via OSD menu (also you can use Telnet command "flash" for the same purpose)
- New: proper shutdown and reboot using runlevels - now HDD is being properly unmounted and HDD errors should become much less frequent
- New: new parameters in pgi.conf: HDD_AWAKE and HDD_DETECT (see HDD_en.txt)

Version IPBox9000hd à télécharger ici: http://rs319.rapidshare.com/files/408775925/PGI-9000-v0.7.2a.zip

Bon amusement
MIEUX VAUT ALLUMER UNE PETITE LUMIÈRE QUE DE SE PLAINDRE DE L'OBSCURITÉ...
-GigaBlue Quad + HDD 1TB + Openmips
-IPBox9000HD+HDD250GB+DGS off en flash + en multiboot: E2 (hdd) + images diverses en usb
-Cartes: TNTsat+Télésat (OScam)
-Parabole BisatG4: 19,2°E-13°E-4.8°E-5°W